ZKTeco SpeedFace-V5L Series - Data Management; Delete Data

SpeedFace-V5L Series User Manual
Page | 71 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Shortcut Keys Mappings
Users may define shortcut keys for attendance status and functional keys on the main interface. So, on the
main interface, when the shortcut keys are pressed, the corresponding attendance status or the function
interface displays directly.
Tap Shortcut Key Mappings on the Personalize interface to set the required shortcut keys.
 On the Shortcut Key Mappings interface, tap on the required shortcut key to configure the shortcut
key settings.
 On the Shortcut Key ("F1") interface, tap function to set the functional process of the shortcut key
either as punch state key or function key.
 If the Shortcut key is defined as a function key (such as New user, All users, etc.), the configuration is
done as shown in the image below.
 If the Shortcut key is set as a punch state key (such as check-in, check-out, etc.), then it is required to
set the punch state value (valid value 0~250), name, and switch time.