Name: ZKTeco SpeedFace-V5L Series
Brand: ZKTeco
Rating: 5 (1 reviews)

To Next Page

To Previous Page

SpeedFace-V5L Series User Manual

Function Description

Function Name

Description

Enable

Domain

Name

Server Address

Once this mode is turned ON, the domain name mode "http://..."

will be used, such as http://www.XYZ.com, while "XYZ" denotes the

domain name.

Disable

Domain

Name

Server Address

The IP address of the ADMS server.

Server Port

Port used by the ADMS server.

Enable Proxy Server

The IP address and the port number of the proxy server is set

manually when the proxy is enabled.

HTTPS

To increase the security of browser access, users can enable the

HTTPS protocol to create a secure and encrypted network

transmission and assure the security of sent data through identity

authentication and encrypted communication.

This function is enabled by default. This function can be enabled or

disabled through the menu interface, and when changing the

HTTPS status, the device will pop up a security prompt, and restart

after confirmation.

Wiegand Setup

It is used to set the Wiegand input and output parameters.

Tap Wiegand Setup on the Comm. Settings interface to set the Wiegand input and output parameters.

6.6.1 Wiegand Input

Other manuals for ZKTeco SpeedFace-V5L Series

Questions and Answers:

Need help?

Do you have a question about the ZKTeco SpeedFace-V5L Series and is the answer not in the manual?

General