SpeedFace-V5L Series User Manual
Page | 57 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Access Logs Setting
Click Access Logs Setting on the System interface.
Function Description
Function Name Description
Camera Mode
This function is disabled by default. When enabled, a security prompt will
pop-
up and the sound of shutter in the camera will turn on mandatorily.
There are 5 modes:
No Photo: No photo is taken during user verification.
Take photo, no save: Photo is taken but not saved during verification.
Take photo and save: All the photos taken during verification is saved.
Save on successful verification: Photo is taken and saved for each successful
verification.
Save on failed verification: Photo is taken and saved only for each failed
verification.
Display User Photo
This function is disabled by default.
When enabled, a security prompt will
pop-up.
Access Log Alert
When the record space of the attendance access reaches the maximum
threshold value, the device automatically displays the memory space warning.
Users may disable the function or set a valid value between 1 and 9999.
Periodic Del of Access
Logs
When access log
s reach its maximum capacity, the device automatically
deletes a set of old access logs.
Users may disable the function or set a valid value between 1 and 999.
To Next Page
Loading...
Need help?
General
