SpeedFace-V5L Series User Manual
Page | 31 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
3 Main Menu
Press on the initial interface to enter the main menu, as shown below:
Function Description
Menu Descriptions
User Mgt.
To Add, Edit, View, and Delete information of a User.
User Role
To set the permission scope of the custom role and enroller for the users, that is, the
rights to operate the system.
COMM.
To set the relevant parameters of Network, Serial Comm., PC Connection, Wireless
Network, Cloud Server, Wiegand and Network Diagnosis.
System
To set parameters related to the system, including Date & Time, Access Logs Setting,
Face, card, password and Fingerprint parameters, Video Intercom parameters,
security settings and resetting to factory settings.
Personalize
To customize settings of User Interface, Voice, Bell Schedules, Punch State Options
and Shortcut Key Mappings settings.
Data Mgt.
To delete all relevant data in the device.
Access Control
To set the parameters of the lock and the relevant access control device including
options like Time schedule, Holiday Settings, Combine verification, Anti-passback
Setup, and Duress Option Settings.
Attendance
Search
To query the specified Event logs, check Attendance Photos and Blocklist attendance
photos.
Autotest
To automatically test whether each module functions properly, including the LCD
Screen, Audio, Microphone, Fingerprint sensor, Camera, and Real-Time Clock.
System Info
To view Data Capacity , Device and Firmware information and Privacy Policy of the
device.
Note: When users use the product for the first time, they should operate it after setting administrator
privileges. Tap User Mgt. to add an administrator or edit user permissions as a super administrator. If the
To Next Page
Loading...
Need help?
General
