SpeedFace-V5L Series User Manual
Page | 54 Copyright©2022 ZKTECO CO., LTD. All rights reserved.
Site Code
It is similar to the device ID. The difference is that a site code can be set manually
and is repeatable on a different device. The valid value ranges from 0 to 256 by
default.
Pulse Width(us)
The time width represents the changes in the quantity of electric charge with
regular high-frequency capacitance within a specified time.
Pulse Interval(us)
The time interval between pulses.
ID Type
Select the ID types as either User ID or card number.
Network Diagnosis
To set the network diagnosis parameters.
Click Network Diagnosis on the Comm. Settings interface. Enter the IP address that needs to be
diagnosed, and click Start the diagnostic test to check whether the network can connect to the device.
To Next Page
Loading...
