Setting the recording time display
Either the elapsed recording time or the remaining possible recording time can be selected to be shown
during recording.
1. Press .
This opens the Menu Screen.
2. Use / to select “Recording” and press to confirm.
3. Use / to select “Rec Counter” and press to confirm.
4. Use / to set the time to be shown and press to confirm.
Item Explanation
Elapsed Time This shows the current elapsed recording time.
Remaining Time This shows the remaining recordable time.
NOTE:
If the file size exceeds 2 GB during recording, a new file will be created automatically and recording will
continue without pause. If this happens, the elapsed recording time shown on the Home Screen will not be
reset.
55
To Next Page
Loading...
