Enabling the sound marker function
Half-second tone signals (sound markers) can be output from the output (PHONE OUT and LINE OUT) jacks
when recording is started.
Since sound markers are also written to recording files, when recording audio for video with the F3,
sending its output signal to the camera input can make synchronizing audio and video easier.
1. Press .
This opens the Menu Screen.
2. Use / to select “Recording” and press to confirm.
3. Use / to select “Sound Marker” and press to confirm.
4. Use / to select “On” and press to confirm.
Use a stereo mini jack cable to connect the camera input jack to the F3 LINE OUT jack.
NOTE:
Be careful with the volume if you are monitoring the input sound with headphones, for example.
54
To Next Page
Loading...
