126
■ Outputting timecode only when recording
Whether or not timecode is output from the TIMECODE IN/OUT jack
when recording is stopped can be set.
3. Use and to select
Mode, and press
.
4. Use and to select
TC Out, and press
.
5. Use and to select
Rec Only, and press
.
NOTE
•
• Timecode will continue to be output when recording/playback is paused.
•
• This cannot be set when Mode is set to Off, Ext or Ext Auto Rec.
HINT
Always: Timecode is always output regardless of the recorder status.
Rec Only: Timecode is output only when recording.
To Next Page
Loading...
