Zoom F6 - Automatically Enabling Internal Timecode When no; External Timecode Is Input; Synchronizing Audio Clock with External Timecode

127
■ Synchronizing audio clock with external timecode
3. Use and to select
Mode, and press
.
4. Use and to select Ext
Audio Sync, and press
.
5. Use and to select
On, and press
.
NOTE
•
• When there is no external timecode, the internal audio clock is enabled to
preserve continuity.
•
• This cannot be set when Mode is set to Off, Int Free Run, Int Rec Run or
Int RTC Run.
■ Automatically enabling internal timecode when no
external timecode is input
The automatic generation of internal timecode can be enabled to pre-
serve continuity when there is no external timecode.
3. Use and to select
Mode, and press
.
4. Use and to select Ext
Continuous, and press
.