Zoom F6 - Setting the Threshold; Setting the Type

87
■ Setting the type
7. Use and to select
Type, and press
.
8. Use and to select
the type, and press
.
Setting Explanation
Hard Knee
Only peaks that exceed the threshold are attenuated. There is
no effect below the threshold.
Soft Knee
The limiter gradually affects the signal about 6 dB below the
threshold for a gentler effect.
NOTE
This setting becomes available when On/Off is set to On (Normal).
■ Setting the threshold
This sets the base level from which the limiter operates.
7. Use and to select
Threshold, and press
.
8. Use and to adjust
the setting, and press
.
HINT
This can be set from −16 to −2 dBFS.
NOTE
This setting becomes available when On/Off is set to On (Normal).