143
Using an FRC-8 as a controller
NOTE
An cannot be used when operating with AA batteries. When mul-
tiple power supplies are connected to an
, the power supply being used
will automatically change according to the remaining battery charge. When
it switches to AA batteries, connection with an
will be interrupted.
1. Press .
2. Use and to select
SYSTEM, and press
.
3. Use and to select
USB, and press
.
4. Use and to select
FRC-8, and press
.
5. Use and to select
Connect, and press
.
6. Use a USB cable to connect the and the .
7. Turn the power on.
When an is connected to the , it can be used to adjust settings, including trim, fader and pan.
To Next Page
Loading...
Need help?
General
