Zoom F6 - iOS Device Remote Control

154
Operating with an iOS device
■ Pairing with an iOS device
By connecting a ZOOM wireless adapter (e.g. BTA-1) and using the ded-
icated controller app, the can be operated from an iOS device.
NOTE
•
• The dedicated app must be installed on the iOS device beforehand. The
dedicated app can be downloaded from the App Store.
•
• See the manual for the app for procedures to set and operate it.
•
•
The
can only be paired to one iOS device. Pairing a different iOS
device will make it no longer possible to connect with the previously
paired iOS device.
•
• Trying to connect the previous iOS device will cause an error message to
appear on the
display and turn the BTA-1 off.
•
• To reconnect a previously paired iOS device, follow the instructions in the
operation manual for the iOS device that you are using to remove the
that is registered as a Bluetooth device.
•
• Then, after you launch F6 Control, the password input screen will appear,
making pairing possible.
1. Remove the wireless adapter connector cover and con-
nect the wireless adapter.
2. Press .
3. Use and to select
SYSTEM, and press
.