16
Turning the power on and off
■ Turning the power on
1. Press and hold briey.
The ZOOM logo appears and the power turns on.
NOTE
•
• The rst time the power is turned on after purchase, the date/time must
be set ( →P.18). This setting can also be changed later.
•
• If “No Card!” appears on the display, conrm that an SD card is inserted
properly.
•
• If “Card Protected!” appears on the display, the SD card write-protection is
enabled. Slide the lock switch on the SD card to disable write-protection.
•
• If “Invalid Card!” appears on the display, the card is not formatted cor-
rectly. Format the card or use a different card. Formatting SD cards
( →P.175)
■ Turning the power off
1. Press and hold briey.
NOTE
Keep pressing it until the ZOOM logo appears on the LCD.