151
Updating the FRC-8 rmware
1. See "Using an as a controller" ( → P.143), and
connect the
and the .
NOTE
Updating is not possible if the remaining battery or DC power supply
charge is low. In this case, replace the batteries with new ones or use a
charged DC power supply.
2. Copy the update le to the root directory on an SD card.
3. Load the SD card into the SD slot.
4. Press .
5. Use and to select
SYSTEM, and press
.
6. Use and to select
USB, and press
.
7. Use and to select
FRC-8, and press
.
▶ Continue to one of the following procedures.
Checking the rmware versions ………………………………………… P.152
Updating the rmware ………………………………………………………… P.152
The rmware version can be checked and updated to the latest version.
The latest update le can be downloaded from the ZOOM website (www.zoom.co.jp).
To Next Page
Loading...
Need help?
General
