130
Setting Explanation
23.976ND
This is the most common frame rate used with HD cameras
and other high-denition video recording. The count is slower
than the actual time by 0.1%.
24ND
This is the standard frame rate used for recording lm. This is
also used with HD cameras.
25ND
This is the frame rate for PAL video. This is used for PAL video,
which is used in Europe and other regions.
29.97ND
This is a frame rate used for NTSC color video and HD cam-
eras. The count is slower than the actual time by 0.1%. This is
used for NTSC video, which is used in Japan, the United States
and other countries.
29.97D
This is an adjusted frame rate that uses a drop frame to make
NTSC match the actual time. This is used with video for broad-
cast that requires the actual time frame to be matched.
30ND
This is used to synchronize sound with lm that is being trans-
fered to NTSC video. This is the standard frame rate used for
black-and-white television in Japan, the United States and other
countries.
30D
This rate is used for special applications. This synchronizes
at 29.97 fps drop frame with lm sound to be transferred to
NTSC. The count is faster than the actual time by 0.1%.
NOTE
Frame rates must be set in advance to match on devices used for all video
and audio data.
6. When done setting, use
and to select
Enter, and press
.
■ Setting the frame rate for internal timecode
3. Use and to select
FPS, and press
.
4. Use and to select the
frame rate, and press
.
To Next Page
Loading...
Need help?
General
