Zoom F6 - Setting the Automatic Timecode Recording Delay

133
Setting the automatic timecode recording delay
1. Press .
2. Use and to select
TIMECODE, and press
.
3. Use and to select Auto
Rec Delay, and press
.
4. Use and to adjust
the time, and press
.
HINT
This can be set from 0.0 to 8.0 s.
If set to record automatically when external timecode is received, unnecessary recording could occur if timecode is received for a brief amount time.
In order to prevent this, the amount of time until recording starts after timecode is received can be set.