Zoom F6 User Manual

89
■ Setting the target level
When the limiter On/Off setting is set to On (Advanced), use this to set
the target output level for the signal.
7. Use and to select Tar-
get Level, and press
.
8. Use and to adjust
the setting, and press
.
HINT
•
• This can be set from −16 to 0 dBFS.
•
• After a signal passes through the limiter, it will not exceed the set target
level value.
NOTE
This setting becomes available when On/Off is set to On (Advanced).

Zoom F6 Specifications

General

Audio quality	32 bit
XLR in	Yes
Headphone outputs	1
USB 2.0 ports quantity	2
Product color	Black