Zoom F6 - Outputting Alerts through Headphones

109
Outputting alerts through headphones
1. Press .
2. Use and to select
OUTPUT, and press
.
3. Use and to select Head-
phone Out, and press
.
4. Use and to select
Alert Vol, and press
.
5. Use and to adjust
the volume, and press
.
HINT
•
• This can be set to Off or between −48 and −12 dBFs.
•
• When set to Off, no alerts will be output.
When alerts sound Sound type
Remaining battery low 880Hz tone 4 times every 30 seconds
Recording starts 1000Hz tone 1 time
Recording stops 880Hz tone 2 times
Recording not possible 880Hz tone 3 times
The volume can be adjusted for alerts output from headphones when, for example, recording starts and stops.