Zoom F6 - Output Settings and Routing; Headphone Output Configuration

106
Output settings
Setting signals sent to the headphone output
Signals sent to the headphone output can be set to either prefader or postfader for each track.
Saving 10 setting combinations (Setting 1–Setting 10) it is possible.
1. Press .
2. Use and to select
OUTPUT, and press
.
3. Use and to select Head-
phone Out, and press
.
4. Use and to select
Routing, and press
.
5. Use to select
the desired setting.
NOTE
Use on any screen to cycle through Settings 1–10.