26
Recording
1. Press .
This starts recording.
HINT
If the timecode function is enabled, recording will start from frame 00 (00
or 02 when using drop frame) and the le length will always be a full sec-
ond value. This makes synchronization easy when editing later.
2. Press to start a new take when recording.
This will end the current take and start a new take while con-
tinuing to record without interruption.
NOTE
Pressing during recording is only possible after recording for at
least a second.
3. Press to pause.
NOTE
•
• Pausing occurs at whole second increments.
•
• When recording is paused, a mark is added at that point.
Press
to resume recording.
•
• A maximum of 99 marks can be added to a take.
HINT
•
•
During playback,
and can be pressed to jump to places where marks
have been added.
•
• Marks can be added without pausing. ( →P.167)
4. Press to stop.
NOTE
If the file size exceeds 2GB during recording, a new take will be created
automatically and recording will continue without interruption.
No gap in sound will occur between the two takes when this happens.
HINT
•
•
Press and hold
when the Home Screen is open to check the name of
the next take recorded.
•
• Files are automatically saved at regular intervals during recording. If
the power is interrupted or another problem occurs during recording, an
affected le can be restored to normal by playing it with the
.
To Next Page
Loading...
Need help?
General
