25
■ Adjusting input levels
1. Press .
2. Use and to select
INPUT, and press
.
3. Use and to select
PFL, and press
.
4. Use and to select the
desired track, and press
.
5. Use and to select
Trim, and press
.
6. Use and to adjust the
input level, and press
.
HINT
•
• This can be set in a range from +12 to +75 dB when the input source is
set to Mic, from –8 to +55 dB when set to Line, and from –35 to +30 dB
when set to USB.
•
• If the sound distorts even after lowering the input level, try changing mic
positions and adjusting the output levels of connected devices.
•
• Using the limiter ( →P.84)
•
• Using the high pass lter ( →P.82)
To Next Page
Loading...
Need help?
General
