Zoom F6 - Page 158

158
7. Select the as a connected
device on the UltraSync BLUE.
When pairing completes, “Connected”
will appear on the display.
HINT
•
• See the UltraSync BLUE manual for the procedures to select connected
devices.
•
•
Use the
and the UltraSync BLUE as close together as possible to make
communication more reliable.
•
• Even if communication with the UltraSync BLUE is interrupted, timecode
generated by the
will be added to recording les.
Disconnecting from an UltraSync BLUE
Disconnect the and the UltraSync BLUE to stop recording timecode
from it. Pairing information will be retained even when disconnected.
1. Press .
2. Use and to select
SYSTEM, and press
.
3. Use and to select
Bluetooth, and press
.
4. Use and to select
Timecode, and press
.