Zoom F6 - Page 79

79
Setting Explanation
Mic
Use when connecting a mic or other equipment with a
low input level.
Mic (PH) Use for mic level with phantom power.
Line
Use when connecting line level equipment.
The input level will be reduced 20 dB compared to when
Mic is selected.
Line (PH) Use this setting for line level with phantom power.
USB 1–4
When AIF with Rec ( → P.140) is set to On, computer
output signals are treated as input signals
HINT
For phantom power voltage, see “Changing the phantom power settings”
( →P.92).