Zoom MultiTrak R12 User Manual

Setting the click volume
1. Slide the “Level” slider or tap / on the Project Settings Screen (→ Opening the screen where
various project settings can be made).
HINT:
• This can be set from 0 to 100.
• Use to set the click output(s).
- PHONES: The sound is output only from the PHONES jack. The balance with other output can also be
adjusted. (→ Adjusting the volume balance of the MASTER and CLICK signals output to headphones)
- OUTPUT + PHONES: The sound is output from both the OUTPUT and PHONES jacks.
46

Zoom MultiTrak R12 Specifications

General

Brand	Zoom
Model	MultiTrak R12
Category	Recording Equipment
Language	English