Zte ZXR10 5900 Series - Page 101

Chapter9DHCPConguration
Step
CommandFunction
1
ZXR10(config-dhcp-pool)#default-router
<ip_addr>[<ip_addr>][<ip_addr>]
Thisconguresadefault
route.
2
ZXR10(config-dhcp-pool)#nodefault-router
<ip_addr>[<ip_addr>][<ip_addr>]
Thisdeletesthecongured
content.
4.TocongureDNSserverordeletethecorrespondingcongu-
ration,usethefollowingcommands.
Step
CommandFunction
1
ZXR10(config-dhcp-pool)#dns-server<ip_addr>[<ip_
addr>][<ip_addr>]
ThiscongureDNSserver
address.
Thiscommandcancongure
upto8DNSserveraddresses.
2
ZXR10(config-dhcp-pool)#nodns-server
<ip_addr>[<ip_addr>][<ip_addr>]
Thisdeletesthecorrespond-
ingconguration.
5.Tobindthespecicippoolwithdhcppoolordeletebinding
relationship,usethefollowingcommand.
Step
CommandFunction
1
ZXR10(config-dhcp-pool)#ip-pool<ip_pool_name>
Thisbindsthespecicippool
withdhcppool.
<ip_pool_namer>ippool
addresspoolname,1~16
characters.
2
ZXR10(config-dhcp-pool)#noip-poolThisdeletesbinding
relationship.
6.Tocongureipaddresslease-timeordeleteconguredtime,
usethefollowingcommands.
Step
CommandFunction
1
ZXR10(config)#lease-time[[infinite]|[<days><hours
><minutes>]]
Thiscongurseipaddress
lease-time.
<days>0~365
<hours>0~23
<minutes>0~59
innite
Thedefaultis60minutes.
2
ZXR10(config)#nolease-time
Thisdeletesconguredtime.
7.Tocongureotheroptions,usethefollowingcommand.
CondentialandProprietaryInformationofZTECORPORATION87