Zte ZXR10 5900 Series - Configuring Switch Stack System

Chapter6SwitchStackSystem
ConfiguringSwitchStack
System
Step
CommandFunction
1
ZXR10(config)#macswitch-time<0-300>
Thiscongurestimedelayed
parameter .Theunitissecond.
Themaximumvalueis300s.
0,thedefaultvalue,means
whenmaindeviceleavesMAC
addressisswitchedtonew
maindeviceMACaddress.
2
ZXR10(config)#showrunning-configThisviewsconguredMAC
switchingtimefromthe
currentcongurationcontent.
Ifthiscommandissetmac
switch-timewillbeviewed.
ReferenceInformation
1.ThefunctionofenablingMACswitching.
Instacksystem,theMACaddressofmaindeviceisthatof
wholesystem.Whenmaindeviceleaves,standbydevicewill
bethemaindevice.Meanwhile,itsMACaddresswillreplace
MACaddressoforiginalmaindevicetobethatofthewhole
system.Nowatimedelay1-300scanbeconguredbyMAC
switchingfunctionafterdeviceleaves.Inthistime,iftheorig-
inalmaindevicejoinsthisstacksystemagaintheMACaddress
oforiginalmaindevicewillbecomethatofstacksystemand
wholesystemMACaddressisnotswitched;Iforiginalmain
devicedoesn’tjointhisstacksystemtheMACaddressofnew
maindevicewillbecomethatofstacksystem.
2.DefaultConguration
Feature
DefaultConguration
Enable/DisablestackDisable
nvramstack-machine-id
1
nvramstack-member-priority
255
setinterfacestack-enable/stack-disablestack-port
Disable
AccessingtheSpecificStack
MemberbyCommandLine
Instacksystem,alldevicescanlogintootherdevicesbysession
tooperateotherdevices.Whenloggingintomemberdevice,
showoperationoroperationonlesystemwillbecarriedoutand
conguringcommandoperationcan’tbecarriedout.Thatmem-
CondentialandProprietaryInformationofZTECORPORATION57