Zte ZXR10 5900 Series - Policy Routing Configuration Example

ZXR105900/5200SeriesUserManual(BasicCongurationVolume)
FIGURE21POLICYROUTINGEXAMPLE
Switchconguration:
/*DefineanACC,whichdescribesusersin10.10.0.0/24
networksegmentand11.11.0.0/24networksegment*/
ZXR10(config)#aclstandardnumber10
ZXR10(config-std-acl)#rule1permit10.10.0.00.0.0.255
ZXR10(config-std-acl)#rule2permit11.11.0.00.0.0.255
ZXR10(config-std-acl)#exit
/*ConfigurepolicyroutingofQoS*/
ZXR10(config)#redirectin10rule-id1next-hop100.1.1.1
ZXR10(config)#redirectin10rule-id2next-hop200.1.1.1
/*Applytothecorrespondingport*/
ZXR10(config)#interfacegei_1/1
ZXR10(config-gei_1/1)#ipaccess-group10in
ZXR10(config-gei_1/1)#exit
ZXR10(config)#interfacegei_1/2
ZXR10(config-gei_1/2)#ipaccess-group10in
QoSMaintenanceand
Diagnosis
ZXR105900/5200providesthefollowingcommandsofQoSmain-
tenanceanddiagnosis.
1.TodisplayQoSconguration,usethefollowingcommand.
showqos
2.Todisplaycongurationofmapofserviceparameterofdata
packetsaccordingtoconformancelevelandDSCP ,usethefol-
lowingcommand.
showqosconform-dscp
3.Todisplay802.1pparametermaptablecongurationinfor-
mationaccordingtolocal-precedence,usethefollowingcom-
mand.
showqoscos-local-map
80CondentialandProprietaryInformationofZTECORPORATION