Zte ZXR10 5900 Series - RADIUS Configuration

Chapter11NetworkManagementConguration
ZXR10Conguration:
ZXR10(config)#interfacevlan24
ZXR10(config-if-vlan24)#ipaddress192.168.2.2255.255.255.0
ZXR10(config-if-vlan24)#exit
ZXR10(config)#ntpenable
ZXR10(config)#ntpserver192.168.2.1version2
RADIUSConfiguration
RADIUSOverview
RemoteAuthenticationDialInUserService(RADIUS)isastan-
dardAAAprotocol.AAArepresentsAuthorization,Authentication
andAccounting.AAAisusedtoauthenticatetheusersaccessing
theroutingswitchandpreventillegalusersfromaccessingwhich
resultsinenhancingsecurityoftheequipment.
ZXR105900/5200supportsRADIUSauthenticationfunctiontoau-
thenticateT elnetusersaccessingtheroutingswitch.
ZXR105900/5200supportsmultipleRADIUSservergroups.Three
authenticationserverscanbeconguredineachRADIUSgroup.
Theservertimeouttimeandtimesoftimeoutretransmissioncan
besetforeachgroup.Theadministratorcanconguredifferent
RADIUSgroupstoselectaspecicRADIUSserver .
ConfiguringRADIUS
1.TocongureRADIUSaccountinggroup,usethefollowingcom-
mand.
CommandFunction
ZXR10(config)#radiusaccounting-group<group-numb
er>
ThisconguresRADIUS
accountinggroup.
2.TocongureRADIUSauthenticationgroup,usethefollowing
command.
CommandFunction
ZXR10(config)#radiusauthentication-group
<group-number>
ThisconguresRADIUS
authenticationgroup.
3.ToconguretheparametersofRADIUS,peformthefollowing
steps.
CondentialandProprietaryInformationofZTECORPORATION113