Zte ZXR10 5900 Series - Poe Configuration Example

Chapter18POEConguration
Step
CommandFunction
4
ZXR10（config-if）#poeenhanced-mode[enable|
disable]
Thiscongurescompatibility
detectionofportconnected
device.
Thiscommandonlycanbe
usedwhenthisinterface
doesn’tbeenabledPoE
function.
Thedefaultisenabled.
Thiscommandindicates
whethertoopenthe
connecteddevice
compatibilitydetection.
Ifenableiscongured,power
willbesuppliedonportwhen
non-standardPDdevice
(ciscobigcapacitydevice)
isdetected.Ifdisableis
congured,powerwillbe
suppliedonlywhenstandard
PDdeviceisdetected.
5
ZXR10（config）#poeovertemperatureauto-recovery
enable
Thisconguresswitch
temperaturerecovery.
Whendeviceworksatstack
mode,thecommandformat
ispoeovertemperature
auto-recoveryenable
device-id<device-id>
Thedefaultisdisabled.
6
ZXR10（config#poepower-threshold<40-90>
Thisconguresswitchpower
occupancyalarmthreshold.
Whendeviceworksinstack
mode,thiscommandformat
ispoepower-threshold
<40-90>device-id
<device-id>.
Thedefaultis80.
7
ZXR10（config）#poeupgrade-firmware
{firmware-name}
Thisupgradesrmwareused
indevice.
Whendeviceworksinstack
mode,thiscommandformat
ispoeupgrade-firmware
{firmware-name}
device-id<device-id>.
Thiscommandupgrades
FirmwarePSEhandling
softwareon-line.
PoEConfigurationExample
ThisexamplesshowsthePoEcongurationonswitchinastack
system.
ZXR10(config)#intgei_2/1/5
ZXR10(config-gei_2/1/5)#poepriorityhigh
CondentialandProprietaryInformationofZTECORPORATION187