Zte ZXR10 5900 Series - Configuring DOT1 X Parameter

ZXR105900/5200SeriesUserManual(BasicCongurationVolume)
CommandFunction
ZXR10(config-nas)#aaa<rule-id>radius-server
authentication<group-number>
ThisbindsanAAAcontrolentry
withtheradiusservergroup.
13.Tocongurebindingradiusaccountingservergroup,usethe
followingcommand.
CommandFunction
ZXR10(config-nas)#aaa<rule-id>radius-server
accounting<group-number>
Thisconguresbindingradius
accountingservergroup.
14.Tocongureauthenticationmodeaslocalorradiusserver
mode,usethefollowingcommand.
CommandFunction
ZXR10(config-nas)#aaa<rule-id>authentication
{local|radius}
Thisconguresauthentication
modeaslocalorradiusserver
mode.
15.Tocongureauthorizationmode,usethefollowingcommand.
CommandFunction
ZXR10(config-nas)#aaa<rule-id>authorization
{auto|unauthorized|authorized}
Thisconguresauthorization
mode.
ConfiguringDOT1XParameter
1.Toconguredot1xperiodforre-authentication,usethefollow-
ingcommand.
CommandFunction
ZXR10(config-nas)#dot1xre-authentication{enable
[period<period>]|disable}
Thisconguresdot1xperiodfor
re-authentication.
2.Tocongurethequietperiodofdot1xauthentication,usethe
followingcommand.
CommandFunction
ZXR10(config-nas)#dot1xquiet-period<period>
Thisconguresthequietperiod
ofdot1xauthentication.
3.Tocongurethesendingperiodofdot1xauthentication,use
thefollowingcommand.
132CondentialandProprietaryInformationofZTECORPORATION