Zte ZXR10 5900 Series - Configuring 802.1 X VLAN Hopping

ZXR105900/5200SeriesUserManual(BasicCongurationVolume)
6.Toconguredomainaccountingserverinformation,usethe
followingcommand.
CommandFunction
ZXR10(config-domain)#domain-radius-account-server
<server-id>
Thisconguresdomain
accountingserverinformation.
ZXR10(config-domain)#nodomain-radius-account-serverThisdeletesdomainaccounting
serverinformation.
7.Toconguredomainauthenticationserverinformation,usethe
followingcommand.
CommandFunction
ZXR10(config-domain)#domain-radius-authen-server
<server-id>
Thisconguresdomain
authenticationserver
information.
ZXR10(config-domain)#nodomain-radius-authen-serverThisdeletesdomain
authenticationserver
information.
8.TocongureISPnameinrule,usethefollowingcommand.
CommandFunction
ZXR10(config-nas)#aaa<rule-id>default-isp<isp-name>[
default]
ThisconguresISPnamein
rule.
ZXR10(config-nas)#noaaa<rule-id>default-isp
[<isp-name>]
ThisdeletesISPnameinrule.
9.Toconguredomainnameseparatorinrule,usethefollowing
command.
CommandFunction
ZXR10(config-nas)#aaa<rule-id>domaindelimiter
<domaindelimiter>
@,/,%,#orothercharacters.
ZXR10(config-nas)#noaaa<rule-id>domaindelimiterThiscancelsdomainseparator
inrule.
Configuring802.1xVLANHopping
TocongureVLANhoppingfunctionattheinterface,usethefol-
lowingcommand.
CommandFunction
ZXR10(config-gei_1/x)#vlanjump{enable|disable}[de
faultauthvlan<vlan-id>]
ThisconguresVLANhopping
functionatthespecicinterface.
136CondentialandProprietaryInformationofZTECORPORATION