Zte ZXR10 5900 Series - Loopback Detection Configuration; Configuring Port Loopback Detection; Port Loopback Detection Overview

ZXR105900/5200SeriesUserManual(BasicCongurationVolume)
FIGURE16PORTRSPANMIRRORINGEXAMPLE
CongurationofSwitchA:
ZXR10(config)#interfacegei_1/1
ZXR10(config-gei_1/1)#monitorsession1sourcedirectionrx
ZXR10(config-gei_1/1)#exit
ZXR10(config)#interfacegei_1/2
ZXR10(config-gei_1/2)#monitorsession1source
ZXR10(config-gei_1/2)#exit
ZXR10(config)#interfacegei_1/3
ZXR10(config-gei_1/3)#monitorsession1destinationrspan-vlanid10priority1
LoopbackDetection
Configuration
PortLoopbackDetectionOverview
ZXR105900/5200supportssingleportloopbackdetection.This
functioncandetecttheloopbackofuserwhichconnectstothe
switchandswitchitself.Thenitcansolvethisproblem.Itcan
avoidbroadcaststorminresultofloopback.
ZXR105900/5200detectsloopbackofafewportsorallports.By
defaultitisnotdetected.ItsupportsloopbackdetectioninVlan.
Oneportsupportsuptoloopbackdetectionof8Vlansatthesame
time.
ConfiguringPortLoopbackDetection
Step
CommandFunction
1
ZXR10(config)#loop-detectinterface<port-name>[e
nable|disable]
Thisenablestheloopback
detectionfunctionofoneport
ormultipleports.
40CondentialandProprietaryInformationofZTECORPORATION