Zte ZXR10 5900 Series - Managing DOT1 X Authentication Access User

ZXR105900/5200SeriesUserManual(BasicCongurationVolume)
CommandFunction
ZXR10(config-nas)#localuser<user-id>port<port-name>Thisbindstheuserwiththe
port.
4.TobindtheuserwiththeVLAN,usethefollowingcommand.
CommandFunction
ZXR10(config-nas)#localuser<user-id>vlan<vlan-id>Thisbindstheuserwiththe
VLAN.
5.TobindtheuserwiththeMACaddress,usethefollowingcom-
mand.
CommandFunction
ZXR10(config-nas)#localuser<user-id>mac
<mac-address>
ThisbindstheuserwiththeMAC
address.
6.Tocongurewhethertochargethelocaluser ,usethefollowing
command.
CommandFunction
ZXR10(config-nas)#localuser<user-id>accounting
{enable|disable}
Thiscongureswhetherto
chargethelocaluser .
ManagingDOT1XAuthentication
AccessUser
1.Todisplayalldot1xauthenticationusers,usethefollowing
command.
CommandFunction
ZXR10(config-nas)#showclients[device<device-numb
er>|index<client-index>|mac<mac-address>|port
<port-name>|vlan<vlan-id>]
Thisdisplaysalldot1x
authenticationusers.
2.Todeleteaspecicuser ,usethefollowingcommand.
CommandFunction
ZXR10(config-nas)#clearclient[index<client-index>|port
<port-name>|vlan<vlan-id>]
Thisdeletesaspecicuser .
134CondentialandProprietaryInformationofZTECORPORATION