Zte ZXR10 5900 Series - Maintaining Cluster

ZXR105900/5200SeriesUserManual(BasicCongurationVolume)
CommandFunction
ZXR10(config)#groupmember{((mac<mac_addr>)
[member<mem_id>])|(device<device_id>)}
Thisaddsaspecicequipment
orMACaddressasamemberon
thecommandswitch.
MaintainingCluster
1.Torestartthememberonthecommandswitch,usethefol-
lowingcommand.
CommandFunction
ZXR10(config)#groupreset-member{all|<member_id>}Thisrestartsthememberonthe
commandswitch.
2.Tosavethememberonthecommandswitch,usethefollowing
command.
CommandFunction
ZXR10(config)#groupsave-member{all|<member_id>}
Thissavestheconguration
formemberonthecommand
switch.
3.Todeletethemembercongurationlefromthecommand
switch,usethefollowingcommand.
CommandFunction
ZXR10(config)#grouperase-member{all|<member_i
d>}
Thisdeletesthemember
congurationlefromthe
commandswitch.
4.Tocongurethetftpserveronthecluster ,usethefollowing
command.
CommandFunction
ZXR10(config)#grouptftp-server<ip_addr>Thisconguresthetftpserver
onthecluster .
5.Tocongurethealarmreceiveronthecluster ,usethefollowing
command.
CommandFunction
ZXR10(config)#grouptrap-host<ip_addr>
Thisconguresthealarm
receiveronthecluster .
148CondentialandProprietaryInformationofZTECORPORATION