Zte ZXR10 5900 Series - Configuring ZTP Topology Collection Protocol

ZXR105900/5200SeriesUserManual(BasicCongurationVolume)
CommandFunction
ZXR10(config)#zdpholdtime<time>
Thisconguresthevalidholding
timeofZDPinformation.
ConfiguringZTPTopologyCollection
Protocol
1.ToenabletheZTPfunctiongloballyorinspecicinterface,use
thefollowingcommand.
CommandFunction
ZXR10(config)#ztpenable
ThisenablestheZTPfunction
globallyorinspecicinterface.
2.ToconductZTPtopologycollectionondifferentVLANs,usethe
followingcommand.
CommandFunction
ZXR10(config)#ztpvlan<vlanId>ThisconductsZTPtopology
collectionondifferentVLANs.
3.TosetthehopsofZTPtopologycollection,usethefollowing
command.
CommandFunction
ZXR10(config)#ztphop<number>
ThissetsthehopsofZTP
topologycollection.
4.ToseteachhopdelayinsendingZTPprotocolpackets,usethe
followingcommand.
CommandFunction
ZXR10(config)#ztphop-delay<time>Thissetseachhopdelayin
sendingZTPprotocolpackets.
5.TosetdelayinsendingZTPprotocolpacketsontheport,use
thefollowingcommand.
CommandFunction
ZXR10(config)#ztpport-delay<time>ThissetsdelayinsendingZTP
protocolpacketsontheport.
6.Toconductoncetopologycollection,usethefollowingcom-
mand.
146CondentialandProprietaryInformationofZTECORPORATION