Zte ZXR10 5900 Series - Configuring VRRP

ZXR105900/5200SeriesUserManual(BasicCongurationVolume)
ConfiguringVRRP
1.TorunVRRP ,usethefollowingcommand.
CommandFunction
ZXR10(config-if-vlanX)#vrrp<group>ip<ip-address>[se
condary]
ThisrunsVRRP .
ThisconguresmultiplevirtualaddressesinaVRRPgroupand
thelinkedhostcanuseanyaddressasgatewayforcommuni-
cation.
2.TocongureVRRPpriorityontheinterface,usethefollowing
command.
CommandFunction
ZXR10(config-if-vlanX)#vrrp<group>prirority<priority>
ThisconguresVRRPpriorityon
theinterface.
3.Tocongurewhetherpreemptionisenabledontheinterface,
usethefollowingcommand.
CommandFunction
ZXR10(config-if-vlanX)#vrrp<group>preempt[delay
<milliseconds>]
Tocongurewhether
preemptionisenabledon
theinterface,usethefollowing
command.
4.TocongurethetimeintervalforsendingVRRPnoticationson
theinterface,usethefollowingcommand.
CommandFunction
ZXR10(config-if-vlanX)#vrrp<group>advertise
[msec]<interval>
Thisconguresthetimeinterval
forsendingVRRPnotications
ontheinterface.
5.Tocongurehowtolearnaboutthetimeintervalforsending
VRRPpacketsontheinterface,usethefollowingcommand.
CommandFunction
ZXR10(config-if-vlanX)#vrrp<group>learn
Thiscongureshowtolearn
aboutthetimeintervalfor
sendingVRRPpacketsonthe
interface.
6.Tocongureauthenticationcharacterstringontheinterface,
usethefollowingcommand.
106CondentialandProprietaryInformationofZTECORPORATION