Zte ZXR10 5900 Series - DHCP Relay Configuration Example

ZXR105900/5200SeriesUserManual(BasicCongurationVolume)
FIGURE22DHCPSERVERCONFIGURATION
R1conguration:
ZXR10(config)#interfacevlan10
ZXR10(config-if-vlan10)#ipdhcpmodeserver
ZXR10(config-if-vlan10)#ipaddress10.10.1.1255.255.255.0
ZXR10(config-if-vlan10)#exit
ZXR10(config)#ippoolpool1
ZXR10(config-ip-pool)#range10.10.1.1010.10.1.100255.255.255.0
ZXR10(config-ip-pool)#exit
ZXR10(config)#ipdhcppooldhcp1
ZXR10(config-dhcp-pool)#ip-poolpool1
ZXR10(config-dhcp-pool)#exit
ZXR10(config)#ipdhcppolicyp11
ZXR10(config-dhcp-policy)#dhcp-pooldhcp1
ZXR10(config-dhcp-policy)#default-route10.10.1.1
ZXR10(config-dhcp-policy)#exit
ZXR10(config)#interfacevlan10
ZXR10(config-if-vlan10)#ipdhcppolicyp1
ZXR10(config)#ipdhcpenable
DHCPRelayConfigurationExample
RouterattheuserendisconnecteddirectlyasDHCPrelaywhen
theDHCPclientandserverarenotinthesamenetwork.
R1enablesDHCPrelayfunctionandasingleserver10.10.2.2pro-
videsDHCPserverfunction.Thismodeisusuallyadoptedwhena
lotofhostsrequiretheDHCPservice.ThisisshowninFigure23.
100CondentialandProprietaryInformationofZTECORPORATION