Zte ZXR10 5900 Series - Configuring DHCP POOL

ZXR105900/5200SeriesUserManual(BasicCongurationVolume)
Step
CommandFunction
1
ZXR10(config-ip-pool)#range<begin_ip_addr><last_i
p_addr><ip_mask>
ThisconguresIPpoolrange.
<begin_ip_addr>the
beginningaddressofIP
addresspool,<last_n_ip_add
r>theendaddressofIP
addresspool,<ip_maskr>
mask.
2
ZXR10(config-ip-pool)#norange<begin_ip_addr><l
ast_ip_addr><ip_mask>
ThisdeletescorrespondingIP
addressrangeconguration.
<begin_ip_addr>the
beginningaddressofIP
addresspool,<last_n_ip_add
r>theendaddressofIP
addresspool,<ip_maskr>
mask.
ConfiguringDHCPPOOL
ADHCPpoolwillbindaippool.DHCPserverwillallocateaddress
inbindingaddresspool.
1.TocongureaDHCPpoolordeleteaDHCPpool,usethefol-
lowingcommand.
Step
CommandFunction
1
ZXR10(config)#ipdhcppool<word>
ThisconguresaDHCPpool.
<word>DHCPpoolname
2
ZXR10(config)#noipdhcppool<word>ThisdeletesaDHCPpool.
2.TocongurebindingtablebetweenMACaddressandipad-
dressordeletetheoriginalconguration,usethefollowing
commands.
Step
CommandFunction
1
ZXR10(config-dhcp-pool)#binding<mac_addr><ip_ad
dr>[vrf-instance<instance_namer>]
Thisconguresbindingtable
betweenMACaddressandip
address.
<mac_addr>Macaddress
<ip_addr>IPAddress
<instance_namer>instance
name
2
ZXR10(config-dhcp-pool)#nobinding<mac_addr><ip
_addr>[vrf-instance<instance_namer>]
Thisdeletestheoriginal
conguration.
3.Tocongureadefaultrouteordeletetheconguredcontent,
usethefollowingcommands.
86CondentialandProprietaryInformationofZTECORPORATION