Zte ZXR10 5900 Series - Configuring ZDP Neighbor Discovery Protocol

Chapter13ClusterManagementConguration
FIGURE32SWITCHSWITCHINGRULE
ConfiguringCluster
Management
ConfiguringZDPNeighborDiscovery
Protocol
1.ToenabletheZDPfunctiongloballyorinspecicinterface,use
thefollowingcommand.
CommandFunction
ZXR10(config)#zdpenable
ThisenablestheZDPfunction
globallyorinspecicinterface.
2.ToconguretimeintervaloftransmittingZDPpackets,usethe
followingcommand.
CommandFunction
ZXR10(config)#zdptimer<time>
Thiscongurestimeintervalof
transmittingZDPpackets.
3.TocongurethevalidholdingtimeofZDPinformation,usethe
followingcommand.
CondentialandProprietaryInformationofZTECORPORATION145