Cutter with material transport and CE
52
Dimension Front left [mm] Front right [mm] Rear left [mm] Rear right [mm]
A 17.5 17.5 17.5 17.5
b 794.5 794.5 814 814
C 262.5 262.5 282 282
Reference dimension
for distance of holes
532 532 532 532
A Mark the middle of the holes on theundersideof the CE.
a) Measure dimension A from the outside edge of the longitudinal pipe.
b) Measure dimensions B and C from the connecting edge of the longitudinal pipe.
B Drill the holes (dia. 5 mm).
C Cut the M6 threads.
D Vacuum the drill chips with a vacuum cleaner and carefully clean the area.
To Next Page
Loading...
