ZyXEL Communications AMG1302-T10A - Configuring a Customized Service

Chapter 10 Firewalls
AMG1302-T10A User’s Guide
148
The following table describes the labels in this screen.
10.3.3 Configuring a Customized Service
Use this screen to add a customized rule or edit an existing rule. Click a rule number in the
Firewall Customized Services screen to display the following screen.
Figure 81 Security > Firewall > Rules: Edit: Edit Customized Services: Config
The following table describes the labels in this screen.
Table 54 Security > Firewall > Rules: Edit: Edit Customized Services
LABEL DESCRIPTION
No. This is the number of your customized port. Click a rule’s number of a service to go to the
Firewall Customized Services Config screen to configure or edit a customized service.
Name This is the name of your customized service.
Protocol This shows the IP protocol (TCP, UDP or TCP/UDP) that defines your customized service.
Port This is the port number or range that defines your customized service.
Back Click this to return to the Firewall Edit Rule screen.
Table 55 Security > Firewall > Rules: Edit: Edit Customized Services: Config
LABEL DESCRIPTION
Config
Service Name Type a unique name for your custom port.
Service Type Choose the IP port (TCP, UDP or TCP/UDP) that defines your customized port from the
drop down list box.
Port Configuration
Type Click Single to specify one port only or Range to specify a span of ports that define your
customized service.
Port Number Type a single port number or the range of port numbers that define your customized
service.
Back Click this to return to the previous screen without saving.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Delete Click this to delete the current rule.