ZyXEL Communications AMG1302-T10A - Main Window

Chapter 2 The Web Configurator
AMG1302-T10A User’s Guide
25
2.2.3 Main Window
The main window displays information and configuration fields. It is discussed in the rest of this
document.
Filter URL Filter Use this screen to block access to certain URL web sites.
Application
Filter
Use this screen to allow or block traffic from certain applications.
IP/MAC Filter Use this screen to configure IP/MAC filtering rules for incoming or
outgoing traffic.
Advanced
Static Route Use this screen to configure IP static routes to tell your device about
networks beyond the directly connected remote nodes.
Port Binding Use this screen to configure and view port binding groups.
pvid Setting Use this screen to configure 802.1Q settings.
QoS General Use this screen to enable QoS and traffic prioritizing. You can also
configure the QoS rules and actions.
Dynamic DNS This screen allows you to use a static hostname alias for a dynamic IP
address.
Remote MGMT WWW Use this screen to configure through which interface(s) and from which
IP address(es) users can use HTTP to manage the Device.
Teln et Use this screen to configure through which interface(s) and from which
IP address(es) users can use Telnet to manage the Device.
FTP Use this screen to configure through which interface(s) and from which
IP address(es) users can use FTP to access the Device.
SNMP Use this screen to configure through which interface(s) and from which
IP address(es) users can access the SNMP agent on the Device.
DNS Use this screen to configure through which interface(s) and from which
IP address(es) users can send DNS queries to the Device.
ICMP Use this screen to set whether or not your device will respond to pings
and probes for services that you have not made available.
UPnP General Use this screen to turn UPnP on or off.
CWMP Use this screen to have a management server manage the Device with
TR-069.
Maintenance
System General Use this screen to configure your device’s password.
Time and Date Use this screen to change your Device’s time and date.
Logs System Log Use this screen to select which logs your device is to record.
Tools Firmware Use this screen to upload firmware to your device.
Configuration Use this screen to backup and restore your device’s configuration
(settings) or reset the factory default settings.
Restart This screen allows you to reboot the Device without turning the power
off.
Diagnostic General Use this screen to test the connections to other devices.
DSL Line This screen displays information to help you identify problems with the
DSL connection.
Table 3 Navigation Panel Summary
LINK TAB FUNCTION