ZyXEL Communications AMG1302-T10A - Multiple Public and Private IP Address Mappings

Chapter 4 Tutorials
AMG1302-T10A User’s Guide
42
3 Click Edit on a new rule in the Static Route screen.
4 Configure the Static Route Setup screen using the following settings:
4a Type 192.168.10.0 and subnet mask 255.255.255.0 for the destination, N2.
4b Type 192.168.1.253 (R’s N1 address) in the Gateway IP Address field.
4a Click Apply.
Now B should be able to receive traffic from A. You may need to additionally configure B’s firewall
settings to allow specific traffic to pass through.
4.5 Multiple Public and Private IP Address Mappings
If your ISP gives you more than one static IP address for your Internet access, you can map each IP
address for a specific service. This tutorial assumes you are given two static public IP addresses.
You want to map them to two servers A and B.
A
B
IP-1
IP-2
C