ZyXEL Communications AMG1302-T10A - Chapter 4 Tutorials; 4.2 Setting Up a Secure Wireless Network

AMG1302-T10A User’s Guide 31
CHAPTER 4
Tutorials
4.1 Overview
This chapter shows you how to use the Device’s various features.
• Setting Up a Secure Wireless Network, see page 31
• Configuring the MAC Address Filter, see page 38
• Configuring Static Route for Routing to Another Network, see page 40
• Multiple Public and Private IP Address Mappings, see page 42
• Firewall Rule to Allow a Specified Service, see page 46
• Port BindingConfiguration, see page 48
4.2 Setting Up a Secure Wireless Network
Thomas wants to set up a wireless network so that he can use his notebook to access the Internet.
In this wireless network, the Device serves as an access point (AP), and the notebook is the
wireless client. The wireless client can access the Internet through the AP.
Thomas has to configure the wireless network settings on the Device. Then he can set up a wireless
network using WPS (Section 4.2.2 on page 33) or manual configuration (Section 4.2.3 on page 36).
4.2.1 Configuring the Wireless Network Settings
This example uses the following parameters to set up a wireless network.
SSID Example
Security Mode WPA2-PSK with WPA Compatible
Pre-Shared Key DoNotStealMyWirelessNetwork
802.11 Mode 802.11b+g+n