ZyXEL Communications AMG1302-T10A - The Time and Date Screen

Chapter 20 System Settings
AMG1302-T10A User’s Guide
204
20.3 The Time and Date Screen
Use this screen to configure the Device’s time based on your local time zone. To change your
Device’s time and date, click Maintenance > System > Time and Date. The screen appears as
shown.
Figure 112 Maintenance > System > Time and Date
The following table describes the fields in this screen.
Retype to
confirm
Type the new password again for confirmation.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 77 Maintenance > System > General
LABEL DESCRIPTION
Table 78 Maintenance > System > Time and Date
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your Device.
Each time you reload this page, the Device synchronizes the time with the time server.
Current Date This field displays the date of your Device.
Each time you reload this page, the Device synchronizes the date with the time server.
Time and Date Setup