Chapter 14 PVID Setting
AMG1302-T10A User’s Guide
168
enabled for the VID of a frame, then the frame is transmitted as a tagged frame; otherwise, it is
transmitted as an untagged frame.
14.2 The pvid Setting Screen
Use this screen to activate VLAN and set up VLANs. Click Advanced > pvid Setting to display the
following screen.
Figure 95 Advanced > pvid Setting
The following table describes the labels in this screen.
Table 63 Advanced > pvid Setting
LABEL DESCRIPTION
Active Activate or deactivate the VLAN feature.
PORT This field displays the types of ports available to join the VLAN group.
PVID Assign a VLAN ID for the port. The valid VID range is between 1 and 4094. The Device
assigns the PVID to untagged frames or priority-tagged frames received on this port.
TAG Select TAG if you want the port to tag all outgoing traffic trasmitted through this
VLAN. You select this if you want to create VLANs across different devices and just
the Device.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
To Next Page
Loading...
