Chapter 4 Tutorials
AMG1302-T10A User’s Guide
51
4.7.2 Configuring Port Binding
You can then group specific WAN PVCs with LAN ports or WLANs, so traffic from these ports is
forwarded through specific WAN PVCs. In the configuration shown below, the WAN connections set
up in the previous section are bound as follows:
Access the port binding screen by clicking Advanced > Port Binding, and select Activated to
turn on the port binding feature. Specify the Group Index and select the ports to include in the
port binding group. Click Apply to save the settings. The configured groups can be viewed by
clicking the Port Binding Summary button. See the Port Binding chapter (Chapter 14 on page
195) for more details on configuring port binding.
Table 7 Port Binding Groups
GROUP INDEX WAN CONNECTION LAN PORT
0 PVC0 - for Data eth1, eth2, AP0, AP1, AP2
1 PVC1 - for VoIP eth3
To Next Page
Loading...
