ZyXEL Communications AMG1302-T10A - Page 41

Chapter 4 Tutorials
AMG1302-T10A User’s Guide
41
You need to specify a static routing rule on the Device to specify R as the router in charge of
forwarding traffic to N2. In this case, the Device routes traffic from A to R and then R routes the
traffic to B.
This tutorial uses the following example IP settings:
To configure a static route to route traffic from N1 to N2:
1 Log into the Device’s Web Configurator in advanced mode.
2 Click Advanced > Static Route.
Table 5 IP Settings in this Tutorial
DEVICE / COMPUTER IP ADDRESS
The Device’s WAN 172.16.1.1
The Device’s LAN 192.168.1.1
A 192.168.1.34
R’s N1 192.168.1.253
R’s N2 192.168.10.2
B 192.168.10.33
N2
B
N1
A
R