Chapter 17 Remote Management
AMG1302-T10A User’s Guide
186
Note: If you want your device to respond to pings and requests for unauthorized services,
you may also need to configure the firewall anti probing settings to match.
Figure 107 Advanced > Remote Management > ICMP
The following table describes the labels in this screen.
Table 74 Advanced > Remote Management > ICMP
LABEL DESCRIPTION
ICMP Internet Control Message Protocol is a message control and error-reporting protocol
between a host server and a gateway to the Internet. ICMP uses Internet Protocol (IP)
datagrams, but the messages are processed by the TCP/IP software and directly
apparent to the application user.
Respond to Ping on The Device will not respond to any incoming Ping requests when Disable is selected.
Select LAN to reply to incoming LAN Ping requests. Select WAN to reply to incoming
WAN Ping requests. Otherwise select LAN & WAN to reply to both incoming LAN and
WAN Ping requests.
Apply Click this to save your changes.
Reset Click this to restore your previously saved settings.
To Next Page
Loading...
