ZyXEL Communications AMG1302-T10A - Page 201

Chapter 19 CWMP
AMG1302-T10A User’s Guide
201
Password The password is used to authenticate the Device when making a connection to the
management server. This password on the management server and the Device must be the
same. Type a password of up to 255 printable characters found on an English-language
keyboard.
Connection
Request
Information
Use this part of the screen to allow the management server to connect to the Device after a
successful login.
Path Type the IP address or domain name of the Device. The management server uses this path
to verify the Device.
Port The default port for access to the Device from the management server is port 7547. If you
change it, make sure it does not conflict with another port on your network and it is
recommended to use a port number above 1024 (not a commonly used port). The
management server should use this port to connect to the Device. You may need to alter
your NAT port forwarding rules if they were already configured.
UserName The user name is used to authenticate the management server when connecting to the
Device. Type a user name of up to 255 printable characters found on an English-language
keyboard. Spaces and characters such as @#$%^&*()_+ are allowed.
Password The password is used to authenticate the management server when connecting to the
Device. Type a password of up to 255 printable characters found on an English-language
keyboard. Spaces are not allowed.
Periodic Inform
Config
Periodic
Inform
Select Activated to have the Device periodically send information to the management
server (recommended if CWMP is enabled) or select Deactivated to not have the Device
periodically send information to the management server
Interval The interval is the duration in seconds for which the Device must attempt to connect with
the management server to send information and check for configuration updates. Enter a
value between 1 and 86400 seconds.
Apply Click this to save your changes.
Cancel Click this to restore your previously saved settings.
Table 76 Advanced > CWMP (continued)
LINK DESCRIPTION